Relay Switch uC for Guitar Effects Bypass
  • Relay Switch uC for Guitar Effects Bypass

Relay Switch uC for Guitar Effects Bypass

Pre-programmed mcu to control up to 3 relays with 3 footswitches.

Bypass version

Sconti sul volume

Quantità Prezzo Salva
5 2,85 € Fino a 0,75 €
10 2,70 € Fino a 3,00 €
20 2,40 € Fino a 12,00 €
3,00 €
Quantità

Descrizione

For use with Relay Switch PCB or with your own custom pcb.


Firmware versions description:

3M-3RL: 3 momentary N.O.(normally open) clickless footswitch to drive up to 3 relay+LED individually.

2M-2RL-1O: 2 momentary N.O.(normally open) clickless footswitch to drive up to 2 relay+LED individually plus an optocoupler.
Optocoupler can be made with GL4537-1 ldr and green ultrabright LED.
Slight volume drop for a few milliseconds when engage it.

3NM-3RL: 3 latching footswitch to drive up to 3 relay+LED individually. Most silent.

3NM-2RL-1L: 3 latching footswitch (A, B, C) to drive up to 3 relay+LED (A, B) plus an additionary LED(C) to select between different routing options: A, B, A+B.

Detailed description of 3NM-2RL-1L:

If relay+led A and relay+led B are off, pressing footswitch A turns relay+led A on.

If relay+led A and relay+led B are off, pressing footswitch B turns relay+led B on.

If relay+led A is on, pressing footswitch B turns relay+led A off and relay+led B on.

If relay+led B is on, pressing footswitch A turns relay+led B off and relay+led A on.

If relay+led A (or relay+led B) is on, pressing footswitch C turns relay+led A, relay+led B and led C on.

If relay+led A and relay+led B are on, pressing footswitch C turns relay+led A, relay+led B and led C off.

If relay+led A and relay+led B are off, pressing footswitch C turns relay+led A, relay+led B and led C on.

 

Dettagli del prodotto
Documenti Allegati
Scarica
9 other products in the same category: